Distributed state estimation for heterogeneous mobile sensor networks with stochastic observation loss

The problem of distributed fusion and random observation loss for mobile sensor networks is investigated herein. In view of the fact that the measured values, sampling frequency and noise of various sensors are different, the observation model of a heterogeneous network is constructed. A binary random variable is introduced to describe the drop of observation component and the topology switching problem caused by complete observation loss is also considered. A cubature information filtering algo...     

一般概率测度的核估计

在测度弱收敛的意义下，研究了一般概率测度μ的核估计μn，得到了它的渐近无偏性、强相合性及在给定条件下的收敛速度。     

机翼重量分配方法在轻型飞机中的应用

针对目前飞机初始设计阶段的机翼重量估算公式变量较多，条件限制因素较复杂的情况，提出了一种按照机翼重量分配来估算重量的方法。把机翼重量分配到：承弯结构、承剪结构、分布气动载荷结构、起落架影响结构、前后缘结构、襟副翼机构，燃油影响结构、以及其它附属结构。此方法已经在大型飞机的机翼重量估算上取得了良好的效果。通过与一系列常用机翼重量估算公式的对比分析，并且利用已知的10种轻型飞机完成了算例，结果证明此方法有很强的适应性。     

基于卫星观测数据的弹道导弹初始状态估计

利用卫星探测数据对大气层外飞行的弹道导弹弹道进行估计。在极大似然估计中,由于卫星探测导弹运动的可观测性较差,使初始点估计变得十分病态,传统的Gauss Newton迭代算法不再适用,而采用较为复杂Levenberg Marquardt算法,分别对单颗卫星和两颗卫星的情况进行了Monte Carlo仿真,得到了各自的归一化残差测量误差(代价函数),结果表明该算法有效。     

基于粒子群算法的多波位高度估计方法

为解决雷达斜视模式下对目标区域的高度估计问题,提出了一种基于粒子群算法的多波位高度估计方法。利用粒子群优化算法建立约束条件和目标函数,通过多次迭代使目标函数趋于一个最优值,同时得到高度的最优解。利用粒子群优化算法求解多波位测高方程组可减小方程组近似处理误差。此外,利用粒子群优化算法可随时更改波位数目,增强了该测高方法使用的灵活性,有效提高了高度估计精度。通过理论仿真和实测数据仿真分析,验证了粒子群优化算法在求解多波位测高方程组时的有效性。结果表明:该方法具有较高的高度估计精度。     

一种多尺度稀疏极化敏感阵列及其DOA估计方法

针对单个电磁矢量传感器(SS-EMVS)的孔径受限和传统稀疏阵列无法提供目标极化信息的问题,结合分离式电磁矢量传感器和稀疏阵列,提出了一种由SS-EMVS组成的多尺度稀疏极化敏感阵列。该阵列的阵列单元为1个完整的分离式电磁矢量传感器,沿y轴分布,整个阵列按阵元间距分为2个均匀子阵,而且这2个阵元间距都可以大于入射信号的半波长,从而构造一个多尺度稀疏极化敏感阵列以得到目标波达方向(DOA)的高精度估计值。该阵列结合了SS-EMVS可降低阵元互耦和稀疏阵列可扩大阵列孔径的优点,提高了目标DOA估计精度的同时降低了阵元互耦,并且对噪声也具备较好的鲁棒性。而在算法上,首先利用矢量叉积算法得到目标方向余弦的低精度无模糊估计值;其次根据2个子阵的空域旋转不变性得到目标方向余弦的高精度模糊估计值,针对这些方向余弦的估计值提出了一种多尺度解模糊算法,可得到目标方向余弦的高精度无模糊估计值;最后经过运算得到目标的高精度DOA的估计结果。仿真结果证明了所提阵列和算法的有效性。该阵列可应用于某些空间受限的实际应用场合中,如安装在飞行器上的传感器阵列,从而发挥电磁矢量传感器的单天线多分量的特点,也可以与MIMO雷达进行结合,借助极化信息提高雷达系统的检测性能和目标二维DOA的估计精度。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

一种小天体旋转参数估计方法

小天体旋转参数是科学数据，也是小天体测绘，着陆导航的基础数据.研究一种在小天体探测接近段过程中使用的基于图像上特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法.该方法首先建立小天体旋转关系模型，表示小天体在相机坐标系中的姿态变化；然后定义小天体旋转的状态方程，推到了扩展卡尔曼滤波器的计算过程.通过对观测图像序列上的特征点跟踪，利用扩展卡尔曼滤波器方法得到小天体旋转轴指向和自转角速度估计.实验中，在仿真相机与小天体相机100 km距离上，分析了相机坐标系小天体坐标系之间的四元数初值，图像上特征点跟踪精度，相机的观测指向等因素对小天体旋转参数估计精度的影响.实验结果表明，提出的基于图像特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法能够得到具有较高精度的估计结果.     

A new modeling scheme for powered parafoil unmanned aerial vehicle platforms: Theory and experiments

A novel framework is established for accurate modeling of Powered Parafoil Unmanned Aerial Vehicle (PPUAV). The model is developed in the following three steps: obtaining a linear dynamic model, simplifying the model structure, and estimating the model mismatch due to model variance and external disturbance factors. First, a six degree-of-freedom linear model, or the structured model, is obtained through dynamic establishment and linearization. Second, the data correlation analysis is adopted to determine the criterion for proper model complexity and to simplify the structured model. Next, an active model is established, combining the simplified model with the model mismatch estimator. An adapted Kalman filter is utilized for the real-time estimation of states and model mismatch. We finally derive a linear system model while taking into account of model variance and external disturbance. Actual flight tests verify the effectiveness of our active model in different flight scenarios.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.